Computational modelling of water flow inside laboratory Knelson concentrator bowl

Enhanced gravity concentrators such as Knelson concentrator (KC) are extensively used in the mineral processing industry. The complexities of KC bowl geometry and variation of feed characteristics have forced process engineers to design empirically new units using laboratory and pilot-scale Knelson concentrators. However, numerical modelling methods such as computational fluid dynamics (CFD) and discrete element method (DEM) provide a better insight of flow behaviour of fluid and particulate solid phases inside these processing units. This article reports findings of CFD simulations for single-phase water flow inside the laboratory KC. An available standard 7.5-cm laboratory KC bowl was numerically simulated using realisable k-ε turbulence model to resolve the turbulence dispersion of existing transitional flow regime. The effects of relative centrifugal force (RCF) intensity and bed fluidisation water flow rate on the water velocity and pressure distributions were studied. Simulations confirmed the swirling flow pattern governing inside the bowl. The results revealed that the impact of RCF intensity on the water field values is greater than that of bed fluidisation water flow rate. Both velocity and pressure variations inside the bowl rings followed a linear trend.     

Mathematical model for coal conversion in supercritical water: reacting multiphase flow with conjugate heat transfer

Providing heat for supercritical water gasification (SCWG) of coal by coupling subsequent products oxidation in integrated supercritical water reactor (ISWR) provides an effective method for directional control of temperature field and avoids excessive hot spots caused by uniform heating. An exploratory numerical model incorporating particle-fluid flow dynamics, multispecies transport and thermal coupling between endothermic coal gasification and exothermic product oxidation was established to simulate the reacting multiphase flow process of coal conversion in a novel lab-scale ISWR. An eleven-lump kinetic model was proposed for the prediction of chemical reactions. And the thermal coupling relationship was described by conjugate heat transfer boundary conditions (BC). Detailed physical and chemical field distribution in ISWR were analyzed and influence factors were discussed. The results showed that oxidation of gas products as inner heat source could promote the gasification reaction with only slight or even little maximum temperature increase of the pressure-bearing wall. Coal feeding rate and oxygen supply method significantly affected the field distribution. The multi-injection compressed-air supply method provided a more uniform temperature field but would reduce heat transfer temperature difference. The carbon gasification efficiency (CGE) in the gasification zone could easily reach up to 97% under mild conditions (less than 650 °C).     

Impact of urban development on residents’ public transportation travel energy consumption in China: An analysis of hydrogen fuel cell vehicles alternatives

Urban development has an important influence on the energy consumption of transportation. To develop public transportation is one of the important ways to decrease the energy consumption of urban transportation. It is very urgent to upgrade technology to reduce the energy consumption and emissions of the vehicles constantly. The popularization of hydrogen fuel cell vehicles is the trend of the future automobile industry, which can effectively reduce traffic energy consumption and alleviate urban pollution. This article analyzes the impact of urban development on public transport and private transportation energy consumption from 2013 to 2015; and uses hydrogen fuel cell vehicles alternatives in urban public transport as a scenario. It shows that urban economic development can effectively reduce public transport. Population growth will increase greatly energy consumption of public transport, while larger cities with reasonable spatial density can reduce traffic energy consumption. Moreover, hydrogen fuel cell vehicles can effectively reduce the energy consumption and pollution emissions of urban transportation during operating. Based on the above conclusions, this article will eventually provide targeted recommendations for the development of Chinese cities, public transport, and hydrogen fuel cell vehicles.     

论三峡水库“蓄清排浑”运用方式及其优化

泥沙问题是三峡工程的关键技术问题之一,在三峡工程论证和初步设计阶段提出水库采取"蓄清排浑"的运用方式,可以解决泥沙问题。2003年水库蓄水运用以来的实践表明,水库基本遵循了"蓄清排浑"调度运用原则,并根据上游来水来沙减少等新情况对水库运用方式进行了优化调整。本文系统分析了三峡水库"蓄清排浑"运行方式及其优化调整的利弊,包括提前5年实施175 m试验性蓄水、汛期水位动态变化、汛末提前蓄水等对水库淤积和坝下游河道演变的影响,提出了进一步优化水库调度方式,形成"蓄清排浑"运用的新模式,保持水库长期使用的建议,试图为三峡水库科学高效安全运用提供科技支撑。     

基于CSC方法的钢铁行业节能减排技术潜力分析

为了研究中国钢铁行业的节能减排潜力，以35项钢铁行业先进节能减排技术为研究对象，建立节能供应曲线(Conservation Supply Curve，简称CSC)模型，分析影响钢铁行业的节能减排收益、成本效益以及钢铁生产流程工序层面的节能减排潜力因素。结果表明，这35项技术全部应用可实现3.01 GJ/t的节能量以及398.22 kg/t的CO2减排量。将结果与第十三个五年计划推广技术作对比，在当前情况下，约有50%的推广技术并不符合成本效益；运用CSC模型进行了钢铁生产流程工序层面的节能减排潜力研究，得到各个工序的节能量和减排量，并据此分析了各项技术未来的发展趋势和应用前景。     

重力注水过程流动不稳定现象关键影响因素研究

重力驱动注水过程中由于流量较小以及蒸汽的积聚可能导致流动不稳定现象的发生，对核反应堆安全运行具有重要的影响。通过实验研究的方法，搭建了重力注水模拟实验装置，研究了不同蒸汽出口形阻、高位储水箱水位和加热棒初始温度下流动不稳定现象的变化规律。结果表明，重力驱动注水过程流动不稳定现象包含冷却水初次注入阶段、注入水逐出阶段和冷却水再注入阶段等。在一定冷却水初始温度、冷却水入口形阻以及系统压力下，蒸汽排出速度以及实验本体内筒顶部的聚集情况取决于蒸汽出口形阻，减小蒸汽出口形阻可加快蒸汽排放速度，压力峰峰值降低、振荡周期变长，有利于系统稳定；提高高位储水箱水位加快了冷却水注入速率，增加了加热棒被淹没率，降低了流动不稳定现象的发生次数和持续时间；随加热棒初始温度的升高，冷却水流量出现了波动向停滞的转变，流动不稳定现象发生的次数增加且持续时间加长。     

Thermal hydraulic analysis of supercritical water reactor cooled by TiO2 nanofluid

Heat transfer study of nanofluids as coolant in SCWRs core has been performed at Helwan University. A thermal hydraulic code has been produced to study the effect of TiO₂ nanofluid water based as a coolant with comparison with pure water as a coolant. Various volume fractions of nanoparticles TiO₂ (2, 6 and 10%) were used in order to investigate its effects on reactor thermalhydraulic characteristics. Based on Parameters of a SCW Canadian Deuterium Uranium nuclear reactor (CANDU), the fuel assembly was modeled to study the effect of nanoparticles volume fraction on thermos-physical properties of basic fluid and the temperature distribution of fuel, cladding surface and coolant in axial direction. The theoretical results showed that the density, viscosity and thermal conductivity of the coolant increases with the increase of nanoparticles volume fraction, contrasting to specific heat, which decreases with the increase in nanoparticles volume fraction.     

Has China's coal consumption actually reached its peak? National and regional analysis considering cross-sectional dependence and heterogeneity

To investigate whether China's coal consumption has actually peaked, this study tests the national and regional coal Kuznets curve (CKC) hypothesis by using a panel dataset of 30 provinces covering 2000 to 2016. To fully capture the trends of coal consumption at the national, regional, and provincial levels, this study proposes a novel regional division method based on coal dependence and economic level. Considering the potential cross-sectional dependence and slope homogeneity, the newly developed methods allowing for heterogeneous slope coefficients are employed. The whole panel and subpanel results validate the CKC hypothesis for China, and province-specific results are mixed. The subpanel results reveal that only in the coal-dependent developing region has the peak of coal consumption not been reached, and for other regions, coal consumption displays a downward trend along with gross domestic product (GDP) increases. Furthermore, the province-specific results suggest that coal consumption will continue to increase slightly in certain provinces. This study implies that to reduce coal consumption, the coal-dependent developing region and provinces with a future turning point should act with great urgency to achieve a balance of economic growth and environmental responsibility. In addition, policymakers formulating coal consumption reduction policy in China must consider the remarkable differences across regions and provinces.     

基于EFEN-SP3方法的pin-by-pin中子动力学计算方法研究

为能直接给出安全分析所需的最热棒功率而不引入组件均匀化近似和精细功率重构近似，本文研究了基于栅元均匀化的pin-by-pin中子动力学计算方法。通过全隐式向后差分对多群时空中子动力学方程组的时间变量进行离散，采用指数函数展开节块-SP₃（EFEN-SP₃）方法求解含裂变介质的多群中子固定源方程组，通过高阶源展开技术消除了中子源分布与缓发中子先驱核分布形状不一致的问题。采用Ks因子、LW外推和粗网再平衡等加速技术提高计算效率。三维pin-by-pin中子动力学问题的数值结果表明：pin-by-pin中子动力学计算能直接给出单棒功率密度分布；高阶源展开技术可有效抑制计算偏差随时间步的累加效应；加速技术可将SP₃动力学计算的求解速度提高134.9倍。     

基于组合双向拍卖的云资源调度方法

针对跨数据中心的资源调度问题，提出了一种基于组合双向拍卖（PCDA）的资源调度方案。首先，将云资源拍卖分为三个部分：云用户代理报价、云资源提供商要价、拍卖代理组织拍卖；其次，在定义用户的优先级及任务紧迫度的基础上，在拍卖过程中估算每一个工作发生的服务等级协议（SLA）违规并以此计算云提供商的收益，同时每轮竞拍允许成交多项交易；最终达到根据用户等级合理分配云资源调度的效果。仿真实验结果表明该算法保证了竞拍成功率，与传统一次拍卖成交一项的组合双向拍卖方案相比，PCDA在竞拍时间段产生的能耗降低了35.00%，拍卖云提供商的利润提高了约38.84%。